Effect of no absorption on LiFePo4?
I bought a low end 100Ah LiFePo4 a couple of years ago. The manufacturer only listed charge and float voltages on their spec sheet. Later I asked them about absorption and they told me 14.4v. They ...
Forum Discussion
Grit dog wrote:
Good lord… add this to Dedmiston’s list of things men will over analyze and pick to death!
You have LFP batteries. Make sure they are relatively or fully charged, make sure they’re disconnected or no draw and then don’t think about them until you need them again
Ha!! In actual practice so TRUE!!…Thanks for distilling this down it’s most Critical Basics!! :B
3 tons
