Electric Brakes having some issues
Ok, I don't have a ton of experience with electric brakes but here is my issue I need a little help with. My rig usually I run my brake gain at 2.5/3 and it stops well. Last weekend did not have m...
Forum Discussion
time2roll wrote:
If you have a clamp-on DC ammeter you can check each wheel is getting about 3 amps.
Too low is a bad connection, too high is a short.
Since all four seem consistent at least pull one off and inspect.
Is it too early in the thread to suggest a disk conversion?
Nope. Come spring, just prioritizing all benjamins budget.
