Electric question
One leg of my 50 amp went out. Both sides of power post are good to go. Hooked up dog bone to 30 amp and both legs worked. Used a new 50 amp cord with twist connection adapter. Worked for a few d...
Forum Discussion
Happened to me once... History
Original plug on 50 amp cord got nasty so I cut it off and grafted on another (Replacement plug properly applied to cord)
One of the connections in the plug failed.
IF I wiggled the plug (which you did when you switched to the dogbone) the connection would "Make" then later re-fail.
Next stop was the shop for other reasons (Tools I don't have) and while the Technician did his thing.. I did mine with a brand new plug and the cord.. No further issues.
Original plug on 50 amp cord got nasty so I cut it off and grafted on another (Replacement plug properly applied to cord)
One of the connections in the plug failed.
IF I wiggled the plug (which you did when you switched to the dogbone) the connection would "Make" then later re-fail.
Next stop was the shop for other reasons (Tools I don't have) and while the Technician did his thing.. I did mine with a brand new plug and the cord.. No further issues.
