kabbro wrote:
enblethen wrote:
Fairly late model converter with three stage output.Owner's manual
Some troubleshooting system on page 7.
Sounds like bad battery!
Enblethen (and everybody else): Thank you. I will take the battery to a shop and have it tested, and am perfectly willing to have the battery replaced as that would be the least expensive option—but I am thinking that a starting reading if 12.56 volts and ending reading of 12.6 after 48 minutes of ldrawing lighting etc is not too bad...what say those who are more knowledgeable than me? Thanks!
c
Correction: ending voltage was 12.3 volts
