gjgrosser
Apr 15, 2018Explorer
Entertainment/Sound System Issues
Hello all,
I just purchased a 2000 Winnebago Chieftain 36W and I am running into an issue with the entertainment/sound system.
It appears that the previous owner had several upgrades installed when they purchased the unit, which one of the upgrades was the entertainment/sound system.
In the upper right cabinet, there is a signal amplifier where you can choose what video source will be on each t.v. (antenna, satellite, cable, vcr, etc.)
There is also a switch where you can choose where the sound comes from that goes to the surround sound system (radio or t.v.)
When the switch is in the radio position the sound goes through the surround system like it should, but when I move the switch to the t.v. position, no sound goes through the surround system and the sound comes out of only the t.v. speaker.
I've checked all connections and everything appears to be connected correctly and nothing is loose. A link to a picture of the selector switch is below so you can see what I have. Any info will be a huge help.
https://drive.google.com/open?id=1OeSQRpyjJC5JekCAF9ot3LWEB8GQEe9f
I just purchased a 2000 Winnebago Chieftain 36W and I am running into an issue with the entertainment/sound system.
It appears that the previous owner had several upgrades installed when they purchased the unit, which one of the upgrades was the entertainment/sound system.
In the upper right cabinet, there is a signal amplifier where you can choose what video source will be on each t.v. (antenna, satellite, cable, vcr, etc.)
There is also a switch where you can choose where the sound comes from that goes to the surround sound system (radio or t.v.)
When the switch is in the radio position the sound goes through the surround system like it should, but when I move the switch to the t.v. position, no sound goes through the surround system and the sound comes out of only the t.v. speaker.
I've checked all connections and everything appears to be connected correctly and nothing is loose. A link to a picture of the selector switch is below so you can see what I have. Any info will be a huge help.
https://drive.google.com/open?id=1OeSQRpyjJC5JekCAF9ot3LWEB8GQEe9f