Extended stay propane use

I get it. Your method is the cheapest way. Price of parts required is something I am not familiar with had not considered. Thanks for clarifying and setting us straight.

The oem frame tank is empty, thr RV isn't going any where until i can pull together the $$ for the transmission repairs, $60 extend a stay
$18 for this one, yes it could have been connected to the main tank, then i would need another $20+ hose between the adapter T and portable cylinder, and i would still lose line pressure, when refilling the portable because the main is empty,
Is it slightly less convenient. Maybe , but I'm stretching my $$ as far as i can, this is about keeping the fridge cold and me warm, the least costly ways possible, not about bbq or line loss ehich is a very small volume, and in a pinch i can even connect a 1# cylinder while getting the 20# portable refilled

Lantley wrote:

Bobbo wrote:

Dutch_12078 wrote:
That seems like an odd setup. Why not connect the extended stay adapter to the onboard tank as it's intended to be and connect the external cylinder to the adapter with a suitable hose? That would make switching between the two sources much easier.

In post #1, the OP stated that he has a stationary rig that won't be moving. He probably will only use the portable cylinders since he can't drive the rig to a propane supplier to refill the onboard tank.

I understand that its working out for the OP and that all that really matters. Nevertheless the OP has merely hard piped his portable tank.
Is he even making use of the Tee? One leg of the tee in not in use. His setup is an odd use of an extended stay Tee

Exactly, and totally defeats the need for the extended stay adapter at all.

He will loose line pressure everytime he changes out his tank, not a very smart setup as I have used a 30lb tank for yrs and always had my main tank as a back up, and never a problem, turn on main tank, switch tank, and never lost line pressure, Just my thoughts.

Bobbo wrote:

Dutch_12078 wrote:
That seems like an odd setup. Why not connect the extended stay adapter to the onboard tank as it's intended to be and connect the external cylinder to the adapter with a suitable hose? That would make switching between the two sources much easier.

In post #1, the OP stated that he has a stationary rig that won't be moving. He probably will only use the portable cylinders since he can't drive the rig to a propane supplier to refill the onboard tank.

I understand that its working out for the OP and that all that really matters. Nevertheless the OP has merely hard piped his portable tank.
Is he even making use of the Tee? One leg of the tee in not in use. His setup is an odd use of an extended stay Tee

Bobbo wrote:

Dutch_12078 wrote:
That seems like an odd setup. Why not connect the extended stay adapter to the onboard tank as it's intended to be and connect the external cylinder to the adapter with a suitable hose? That would make switching between the two sources much easier.

In post #1, the OP stated that he has a stationary rig that won't be moving. He probably will only use the portable cylinders since he can't drive the rig to a propane supplier to refill the onboard tank.

We find it useful to have the onboard tank easily available for temporary use while getting the portable cylinder refilled. We've gone a full year doing that and only dropped the onboard tank about 20%.

Depending on how long the extended stay may be, and the location of such, for some people it may work out better to contact a local propane company and ask if they can bring out a 100 gallon tank, or some such amount, and fill it as needed. Gakes a lot of of you while they deliver as needed.

It may or may not work out, or work out well from a $$$ standpoint, but I do know someone who did that one winter and for them it worked out quite well.

Depending on how long the extended stay may be, and the location of such, for some people it may work out better to contact a local propane company and ask if they can bring out a 100 gallon tank, or some such amount, and fill it as needed. Gakes a lot of of you while they deliver as needed.

It may or may not work out, or work out well from a $$$ standpoint, but I do know someone who did that one winter and for them it worked out quite well.

Dutch_12078 wrote:
That seems like an odd setup. Why not connect the extended stay adapter to the onboard tank as it's intended to be and connect the external cylinder to the adapter with a suitable hose? That would make switching between the two sources much easier.

In post #1, the OP stated that he has a stationary rig that won't be moving. He probably will only use the portable cylinders since he can't drive the rig to a propane supplier to refill the onboard tank.

MrWizard wrote:
I'm good to go, all connected, thank you all,

That seems like an odd setup. Why not connect the extended stay adapter to the onboard tank as it's intended to be and connect the external cylinder to the adapter with a suitable hose? That would make switching between the two sources much easier.