flojet macerator questions
Trying to decide how to set up Flojet macerator pump. I need to make an extension cord and it looks like I will need 10 ga wire for a 15 ft. run. Any suggestions on what type of connections to use? ...
Forum Discussion
wa8yxm wrote:Lynnmor wrote:
I used Powerpole connectors, this company will make up whatever cables you need.
You would not be a fellow ham radio operator Would you
(In another post I mentioned I use a lot of Anderson Power poles, in fact in front of me as I type is a West Mountain 12 slot power pole power strip.. It feeds a whole bunch of stuff.
No, not a ham operator, I can't even keep my iPhone working after the warranty expired and the poison pill update to force a new purchase.
I looked all over to wire up the macerator and was surprised at the lack of cables and supplies to do this simple job. I bought from Powerwerx because they were one of the few that had everything I needed. Even though the purchase was way past their warranty period when I got around to do the wiring, they replaced a bad cable for free. The cable was manufactured with strands of copper poking thru the insulation.
