Generator/ Reverse Polarity Question
Hey folks, My knowledge on these matters is marginal at best so I am hoping someone here might have some suggestions regarding this issue I encountered today. I went to test my shiny new Surge...
Forum Discussion
Pic 6 looks like the white wires are on the correct neutral pin on the 30A (right pin when looking at the front of the gen). Then from there, I can't quite tell but it looks like one of those exact wires heads over to the right side of the 20A which is supposed to be HOT.
In summary, the right side of the 30A should connect to the left side of the 20A (white) and the lower left of the 30A should connect to the right side of the 20A (black).
The green and green/yellow wires are fine as they are.
In summary, the right side of the 30A should connect to the left side of the 20A (white) and the lower left of the 30A should connect to the right side of the 20A (black).
The green and green/yellow wires are fine as they are.
