wa8yxm wrote:
I like goop too.
this is a sliding window,.. so if you had to you could use a suction cup device to slide it. the issue is really that the handle is often also the locking device.
So long as the slider is on the INSIDSE a small length of dowel rod or hakf or quarter round (i'd use quarter) layed in the track works well
or drill STRAIGHT down and drop in a bolt or pin Drop in means lift out,.
IMO - my "guess" is.....it's not a security issue, but how to get hold of the window to slide it.
Security (only) options are easy - as in suggestions offered..
If the OP could elaborate - solutions offered might be better?
What's a "destination trlr"? (Why did we need to know that?)
Normal recreation trlr (RV)? Mobile home?
Suggest the "goop" method (doubtful) or JB Weld for metal to metal.
It's a sticky situation!..:W
~
