Harbor Freight Tools... Inverter Generator

I don't care if Dack & Blecker is a subsidiary of Rolls Royce, the stuff is GARBAGE. DeWalt wants to make as much money as it can so it has a "low quality" level. The Black & Decker line. When someone has the guts to tell me their 1/2" hammer drill is "Alright" when it has far less power than their same level 3/8" drill (this is after they got their grubby mitts on it and supposedly tested it), that the 3/8" hammer drill was NORMAL slightly struggling to bore a 3/8" hole in concrete block, while the 1/2" COULD NOT BORE AT ALL IN THE SAME HOLE both drills used with a 10 gauge extension cord and voltage verified. Three eighths inch and three eighths inch (same masonry drill bit), and B&D comes up with an answer like that after being told "The Whole Story" as explained above.

"We're sorry sir but the drill is not for heavy duty work (you are stuck with it)"

It is well and truly THE END OF THE LINE

I have a three pound ball pien hammer waiting for the next Black and Decker product. I was so angry I went home and took the ball pien to a 20 amp Black and Decker charger that failed after six or seven battery charges. Didn't even bother to open it up to see "why". I gave the 3/8" to Jesus (oh hell yes it too failed in under a year). Everything is now SKIL.

General tires, Craftsman tools (personal injury) and Dack & Blecker are banned from my presence.

Grrrrr....