How to remove wedged or shanked bolt
This is a new one for me. Hopefully someone has a trick that works. Keystone put their own bolts in the pinion mechanism on my slides (see below). It was supposed to be fully threaded 1/4 inch bolt bu...
Forum Discussion
I had that problem the first time I had to remove one.. I have a special took.
but basically it is an air hammer with a "Drift" point (A rounded point on the end of the tool) I barley taped the trigure and it popped out.
I had tried a lot of tools and no joy but that little air hammer did the deed.
Very powerful thrust, and it repeats rapidly, that's what did it, took about 3 Pulses. and pop goes the stuck bolt.
but basically it is an air hammer with a "Drift" point (A rounded point on the end of the tool) I barley taped the trigure and it popped out.
I had tried a lot of tools and no joy but that little air hammer did the deed.
Very powerful thrust, and it repeats rapidly, that's what did it, took about 3 Pulses. and pop goes the stuck bolt.
