This IS the simple solution. If a dealership follows the manuals, it's an invasive, expensive project from standpoints of both Parts and Labor. But mostly labor.
The job is not as hard as it might appear from my detailed write-ups. Any relatively handy person can do this. Say somebody who can replace a drive belt on a lawnmower, change oil/filter on a car, change a flat tire...
Can you post photos?
If you can, take two and post them:
1. Passenger Foot Well: Straight Forward from the Seat, to take in the firewall with the metal servo and a couple hoses. Hoses are thin Plastic Tubes, Black and White
2. Passenger Side of Engine Compartment: From Fender to Center, From Hood Gasket Edge down to include part of the Battery.
If you can't, I'll go take a couple and let you see if they match what you see.
We can do this!
