wsnyderiv wrote:
Thank you so much Doug. I'll get to work checking it all. I'm hoping the motor doesn't need replacing. Any idea how much a motor runs to get replaced?
From the PIC, it looks like the motor bolt is burnt. Now, for replacement, you will need a PIC of the motor and the size(length) and diameter of the motor. Some of the OLD motors are no longer available and you may have to buy a complete Pump/Reservoir. If at my shop, I would send the AP number on the tank and the pic and measurements to HWH to verify which motor it is and if available. NEVER call them for this, Send it in an E mail. You can also remove the motor and see if a local Alternator/Starter rebuild shop can rebuild the motor if not available. Doug
