Inverter grounding to batt or chassis
I'm looking for some input regarding the ground (negative, not neutral) connection for my 1800 watt inverter. I need about 10 of wire to run it back to the battery or I can ground it to the motor hom...
Forum Discussion
Except when people melt them while holding the key, and (get this) pumping the gas pedal.
A GEAR REDUCTION starter motor will take less than half the amperage to crank the engine.
And the frame has nothing at all to do with a negative battery cable that is connected to the engine block for use by starter motor and alternator.+
A GEAR REDUCTION starter motor will take less than half the amperage to crank the engine.
And the frame has nothing at all to do with a negative battery cable that is connected to the engine block for use by starter motor and alternator.+
