Jayco Fresh Water Monitor Wires
Three of my monitor sensor wires were loose under the trailer. The lowest sensor wire is fixed to ground. I hooked all three together and now it shows full even when it is only 1/4 or 1/2 full. How sh...
Forum Discussion
dougrainer wrote:
The other 3 probe wires go to a "red or orange" Squib(K101 resistor) that is about 8 inches from the tank. ALL 3 wires go to this sensor Squib. They are molded to this squib and not removable.
Bingo. My squib resistor is missing. While not technically removable, obviously mine was either weakly installed or something, because it appears that the resistor fell off or was ripped off, leaving just the wires behind. Now how to find a new resistor quickly as I am leaving Wednesday. Thanks for your post - it was extremely helpful to me.
