Forum Discussion
DSchmidt_2000
May 24, 2013Explorer
Was looking around the web and
FOUND THIS article on an electronic load.
FOUND THIS article on an electronic load.
This circuit is useful for characterizing photovoltaic modules, which have two source modes.. . . . . At voltages below VMPP, the photovoltaic modules look like a current source. It is normally difficult to characterize this flat region of the curve with a simple current-mode electronic load, because the voltage output is sensitive to small variations in current, and thus a constant-voltage mode load is a better choice.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,198 PostsLatest Activity: Feb 16, 2025