Leaking Rear Hub on DP
My hub started leaking recently. This will be my first experience with this. First, I am assuming that this is likely just a leaking cover plate, and not a symptom of something serious. I s...
Forum Discussion
It did not have the keepers. Twelve bolts twelve flat washers and the axle. The bolts were the kind with some locking action - bent slightly at the tops to create resistance on the threads. As of a few hours ago, no ooze, but it will take a good drive to really test it.
I found wildly divergent torque specifications for Eaton axles, and it seems to be dependent on the nut size. I found no spec for 3/4 inch bolts, so I shot for a figure between those listed, and settled on 135 ft/lb.
Matt B
I found wildly divergent torque specifications for Eaton axles, and it seems to be dependent on the nut size. I found no spec for 3/4 inch bolts, so I shot for a figure between those listed, and settled on 135 ft/lb.
Matt B
