LED Tailight Weak Flashing Issue - *Solved*
***not sure if "taillight" or "tail light" is correct" as I've seen both... Item in question is the Bargman series 84 light set with the 47-84-420 LED part #. Just one side has the issue of an i...
Forum Discussion
Use the resistor. The lamp's VOLTAGE REGULATOR is malfunctioning and sensing what it believes to be too high of incoming voltage. So it drastically limits current.
I would suggest "overkill city" with the resistor. Lots of wattage rating.
With my home built third brake light systems I enable the lamp for 5 minutes continuous operation. Then gingerly touch fingertip to resistor. If I yell unprintable words, I up the wattage rating.
I would suggest "overkill city" with the resistor. Lots of wattage rating.
With my home built third brake light systems I enable the lamp for 5 minutes continuous operation. Then gingerly touch fingertip to resistor. If I yell unprintable words, I up the wattage rating.
