LIFePO4 batteries - interesting challenges
In another thread I detailed what I was doing to upgrade batteries to LIFePO4. Thought I'd raise a new thread for some challenges I'm facing in case someone searches on it in the future. I have 4 1...
Forum Discussion
phemens wrote:
The battery guy gave me what he admitted were conservative numbers for the Samlex since he wasn't too familiar with the unit. I will be bumping up float to 13.6, absorb to 14.4, float exit to 13.6.
Absorb time I assume is time at voltage before cutting out bulk?
float exit should be lower 13.4, are these battleborn battery's?
absorb time should be higher , set it at an hour and go from there.
