Multiple Batteries in Parallel
I have several regular 12v batteries that are different sizes. Can I safely hook them up in parallel without damaging any of them?
Forum Discussion
The 250 8D took 63 AH to refill, where 68 plus some for heat was expected. This shows further that this test was "problematic" in exactness.
It did show that the smaller battery does not go flat, and that they stay "fairly even" to "good enough" standards (IMO, or at least in my case for how I do things)
I believe the issue with my test is mostly heat loss while recharging. Different in the big 8D from the little 27 and where they are also different brands and construction. Also Puekert is in there somewhere. Wiring too.
Members are invited to run their own little tests for this to see what they get.
It did show that the smaller battery does not go flat, and that they stay "fairly even" to "good enough" standards (IMO, or at least in my case for how I do things)
I believe the issue with my test is mostly heat loss while recharging. Different in the big 8D from the little 27 and where they are also different brands and construction. Also Puekert is in there somewhere. Wiring too.
Members are invited to run their own little tests for this to see what they get.
