Need engineers thoughts on wheel offset
Travel trailer wheels have either a centered or outside offset. My question is this. I have outside offset wheels and have sheared off wheel bolts on 2 different wheels I have weighed everything and I...
Forum Discussion
Have you checked the taper on the nuts? Not all nuts have the same taper. Another issue I had was installing acorn nuts that did not clear the bore of the hole. By that I mean the edge of the hex on the nut contacted the side countersink of the hub. That did not allow the taper of the nut to contact the area of the hub that it should have.
Heard a noise when slowing down. Found that 3 studs had broke and wheel was wobbling. Lucky I caught it before the wheel came off.
Heard a noise when slowing down. Found that 3 studs had broke and wheel was wobbling. Lucky I caught it before the wheel came off.
