Norcold 1200LRIM, STARTS/STOPS ?????
Hi All, The fridge gas burner starts,and then immediately stops. We put a dinosour board in years ago, and we will shortly try to reset the board. Weird,the fridge does not work on AC right n...
Forum Discussion
Start with the basics (assuming you have a 6212XX Dino Bd)
DO you have 12VDC to fridge....display panel lights work/interior light turns on etc?
NO...check the Fuse that feds 12VDC to fridge terminal block (DC Dist Panel)
Fuse good/12VDC at terminal block then check the DC Fuse on circuit board (5A)
YES.....have 12VDC at fridge/DC Fuse good
AC needs 12VDC to function but uses a 5A Fast Acting fuse. (Some use 8A if they have 2 heater elements)
DO you have any error/fault codes?
Propane lights then goes out
Spark Electrode could be dirty/sooted so clean it using emery cloth/steel wool
Spark GAP 1/8' - 3/16' directly over center of burner slots so it is engulfed in flame when it lights off
Is burner slots free/clear of debris and fully intact (not rusted out/falling apart)?
What does flame look like when it does light.....strong/blue/reaching up into flue opening?
DO you have 12VDC to fridge....display panel lights work/interior light turns on etc?
NO...check the Fuse that feds 12VDC to fridge terminal block (DC Dist Panel)
Fuse good/12VDC at terminal block then check the DC Fuse on circuit board (5A)
YES.....have 12VDC at fridge/DC Fuse good
AC needs 12VDC to function but uses a 5A Fast Acting fuse. (Some use 8A if they have 2 heater elements)
DO you have any error/fault codes?
Propane lights then goes out
Spark Electrode could be dirty/sooted so clean it using emery cloth/steel wool
Spark GAP 1/8' - 3/16' directly over center of burner slots so it is engulfed in flame when it lights off
Is burner slots free/clear of debris and fully intact (not rusted out/falling apart)?
What does flame look like when it does light.....strong/blue/reaching up into flue opening?
