Onan 5500 Generator and Whirlpool 2 cu Washer
Can't get the Washer to work with the generator, get all kinds od flashing lights and start stops. Takes 2 hours to do a load. Had it checked under warranty by Whirlpool tech he said nothing wrong. Ha...
Forum Discussion
Altitude should only affect, max output power. should affect the 120v output power
try shutting off the breaker to the converter
i suspect the interference is RF noise from the converter electronics
its a simple test to help isolate possible problems
improper/bad ground on the converter or maybe the transfer switch, could allow RF noise, when on the Onan that doesn't happen when on shore power
try shutting off the breaker to the converter
i suspect the interference is RF noise from the converter electronics
its a simple test to help isolate possible problems
improper/bad ground on the converter or maybe the transfer switch, could allow RF noise, when on the Onan that doesn't happen when on shore power
