Onan Microquiet 4000 Won't Turn Off
My Onan KY series generator starts, and seems to be working fine. The issue I have is that the start/stop switch (either inside or the one mounted on the generator) will no longer allow me to turn th...
Forum Discussion
What is the full model and spec number of your genny.(so I know which control board it uses) Onan starts and stops by switching grounds to control board. the center terminal or common terminal on the switches is grounded.
So if unit starts ok, you know that the ground circuit is ok.
If it will not shut down from either switch location, then likely problem is control board.
another possibility is that the "kill" wire to ignition magneto has come loose, preventing the control board and both switches from stopping the engine
So if unit starts ok, you know that the ground circuit is ok.
If it will not shut down from either switch location, then likely problem is control board.
another possibility is that the "kill" wire to ignition magneto has come loose, preventing the control board and both switches from stopping the engine
