Operating slide using generator no batteries
Headed out to the trailer and need to put out the slide. My two 6v batteries are in the basement staying warm! Can I take my Yamaha 2400is generator and operate the slide and leave the batteri...
Forum Discussion
With batteries in, the slide motor positive wire is connected to the converter's positive wire on the pos battery post, so there is a path from converter to slide motor.
No battery, you have to join those two pos wire ends to complete the path. Vice grip pliers is one way to hold them together. The neg path is ok since each is on the frame.
No battery, you have to join those two pos wire ends to complete the path. Vice grip pliers is one way to hold them together. The neg path is ok since each is on the frame.
