possible converter problem or ?
when hooked to shore power the battery monitor will not read full and the voltage is 12.2 on DC side. when the converter fan kicks on then the monitor will read full and the voltage is 14.36 on DC si...
Forum Discussion
The monitor is a kib.
14.36 volts is measured at the converter output side of the fuse panel where battery cables hook up.
When hooked to shore power and batteries disconnected and nothing on the output volts of converter are 14.36 volts. If I turn on lights the volts drop to 5.73 volts and lights are very dim.
Converter is a WFCO.
Thanks for the replies. I am guessing that the converter is bad because the voltage dropped from 14.36 with no load to 5.73 with a load??????
If so what is a good replacement converter. And I would prefer to spend the money and end up with a good reliable fix.
14.36 volts is measured at the converter output side of the fuse panel where battery cables hook up.
When hooked to shore power and batteries disconnected and nothing on the output volts of converter are 14.36 volts. If I turn on lights the volts drop to 5.73 volts and lights are very dim.
Converter is a WFCO.
Thanks for the replies. I am guessing that the converter is bad because the voltage dropped from 14.36 with no load to 5.73 with a load??????
If so what is a good replacement converter. And I would prefer to spend the money and end up with a good reliable fix.
