Progressive Dynamics 9260 possible issue
Hoping to solicit a bit of advice from the gurus here. I recently installed a PD 9260 and it seems to do a much better job charging my (2) Trojan T105 batteries. The only issue is, the converter ...
Forum Discussion
I can only offer a broad generality: My 9160A runs hotter than I would have expected it to when it doesn't have any load. Not hot enough to run the fan, but the heatsink is certainly "pretty warm". The converter has internal resistors that always carry a load. This is in a closed compartment that's about 7 cubic feet.
