Progressive Industries Install
Getting ready to install a Progressive Industries EMSHW30C in my class c. However there's no room under the bed where the wire is located to do a proper install to mount the unit to the floor or bed ...
Forum Discussion
Dusty R wrote:
I removed the old converter charger from inside the panel and put the new one in it's place.
Dusty
He isn't replacing the converter/charger, he is adding an EMS (Energy Management System), that a lot of folks just call a surge protector.
I also hard wired the built in HW30C using twist lock 30 amp plug/sockets. As added insurance to keep them from twisting loose and coming unplugged (I am a belt and suspenders kind of guy), I put a zip tie around each wire just above the plug/socket, then used another zip tie to lock the separate zip ties together.
