Question about Battery Drain
I recently bought a Macerator to empty my holding tanks at home. It utilizes 12V power. I made some connections to reach the rear gray water tank and it works great but I was wondering if I can leave ...
Forum Discussion
RobWNY wrote:
I recently bought a Macerator to empty my holding tanks at home. It utilizes 12V power. I made some connections to reach the rear gray water tank ...
Judging from your pic you know how to solder and make proper use of shrink wrap so with those skills why not install a 12 vdc connector near the waste gates and wire to it from the battery. That way all you'll have to do to use your macerator is plug it in - just as I do. I chose a 7-pin Bargman connector as it's readily available at minor cost ... wire a matching Bargman to the FloJet and you're all set. :B
