Question about the output from my DIY Solar
So I could use a "shove in the right direction." My Solar is all DIY. Two 100 watt panels, an EPEver 30A MPPT controller. One group 27 (for now). It's working. It's keeping the battery charged. ...
Forum Discussion
pconroy328 wrote:
Today is FULL SUN, No Clouds, Noon in Denver.
I'm getting 30 watts.
Based on what measuring device ?
First get a Victron Battery Monitor, even just the base model.
Second, get meter with an "amp clamp" like a Uni-T UT210E
The battery monitor will show total power going into or out of the battery. With the meter, you can measure current on any positive wire.
