Question about the output from my DIY Solar
So I could use a "shove in the right direction." My Solar is all DIY. Two 100 watt panels, an EPEver 30A MPPT controller. One group 27 (for now). It's working. It's keeping the battery charged. ...
Forum Discussion
mexicowanderer.
Don't short the panels. I think you did not mean to say, "short out the panels with a wire".
Use the amp meter between the panel's positive and negative output to measure amps.
Shorting it out will probably damage something.
Don't short the panels. I think you did not mean to say, "short out the panels with a wire".
Use the amp meter between the panel's positive and negative output to measure amps.
Shorting it out will probably damage something.
