Remove Water Heater Plug
Last fall I was unable to get the water heater plug out to winterize the system. I ended up just blowing out all the lines with compressed air but could still hear water bubbling in the water heater t...
Forum Discussion
Bumpyroad wrote:fj12ryder wrote:
Save yourself some grief and use a standard 6-point socket. As tight as that sounds like, a crow's foot isn't going to work, and a cheap one from HF will just round off the corners.
I can access my anode rod without removing the gas tube. I do have to move it to replace the heating element though.
do you have an atwood?
bumpy
If he's got an anode rod, it doesn't sound like it...
