Removing silicone caulk?
The previous owner used silicone caulk in a few places on the outside trim on the fiberglass siding :(. I've scraped, peeled, slowly and carefully used a flat razor and even gave it good cursing :M ye...
Forum Discussion
I haven't used the two products you mentioned but if it's not a painted gel coat I have used acetone with limited success. It doesn't work well if the silicone is thick.
I use plastic putty knives to keep from scratching the glass. Once it's mostly scrapped off, I scrub with acetone to remove the film.
With the plastic putty knife, when the edge gets messed up, you just touch it to a smooth grinding wheel to re-surface and your ready to go again and again and again.
I use plastic putty knives to keep from scratching the glass. Once it's mostly scrapped off, I scrub with acetone to remove the film.
With the plastic putty knife, when the edge gets messed up, you just touch it to a smooth grinding wheel to re-surface and your ready to go again and again and again.
