IAMICHABOD wrote:
All good information so far I think,as for the vent cover that is an easy one.
First see what type vent lid you have using this
![](https://images-na.ssl-images-amazon.com/images/I/51MRpzoL6xL.jpg)
For long lasting vent covers Polycarbonate ones are the ones you want.
If you haven't done this before Here is a short video that will help you.
You may need a new seal that goes on the metal edge this will make it a tight seal This is what you need
Replace like this
Maxx Air covers are also a good Idea,mine have been on for 9 years and look good as new.
Might be a silly question, but when it comes to measuring for the right size, is there a specific way to measure? Is it from the inside of the opening or outside?