Ryobi 900 Watt Propane Generator
I am interested in any experience with the Ryobi 900 watt propane generator. I generally run on solar only, but am looking at something to top off the batteries after a few cloudy days. Would probabl...
Forum Discussion
I just put a load on the battery to check immediate performance. Battery was about 12.2/12.4 volts feeding my electric vehicle with maybe 1400 watts.
Very good point that the XADC-40 could overload the generator as peak voltage and current is reached. IIRC there was some voltage sag (0.2?) at the transition to absorption and the start of amps tapering. I was actually expecting the XADC-40 to overload the generator.
Not really a full test to fully recharge a low battery. Just wanted to verify what works. XADC is out of production so not much help for anyone looking at converters.
Very good point that the XADC-40 could overload the generator as peak voltage and current is reached. IIRC there was some voltage sag (0.2?) at the transition to absorption and the start of amps tapering. I was actually expecting the XADC-40 to overload the generator.
Not really a full test to fully recharge a low battery. Just wanted to verify what works. XADC is out of production so not much help for anyone looking at converters.
