Setting up my solar system
I'm in the planning stages of adding solar to my travel trailer. I currently have a battery bank of two 6V flooded lead acid GC batteries in series that is 215 Ah 12 volts. I am planning on adding ...
Forum Discussion
CA Traveler wrote:
If those mounts are Z mounts pitch them. Instead use 2x al angle connected with a bolt like a Z and the panels are much easier to remove when needed.
A number of posters have used only 3M VHB tape to secure panels. I used VHB tape, screws and sealed with Dicor.
I like that idea, I just picked up a 325 watt 120 split cell panel to put on my truck caper with an alumium roof. only thing left to arive is the mounting brackets.
did you put the alumin angle on the inside of the panel skirt and tap it for the bolt or the out side and use a nut and bolt?
Steve
