Should I be concerned about this?
When the raised roof was installed on my van, the original roof was cut away, except for a bit above the driver and passenger seats. That bit now forms an interior loft, for storage or for a child bed...
Forum Discussion
I think Option #1 is the best and simplest choice. Can you push the roof up and run some short lag screws with large washers into the plywood?
Or, push the roof up and run the lags into a 2x4 placed along the edge of the roof cutaway. It would be less weight and create a lip to keep things from sliding off the loft.
A verticle 2x4 by the passenger seat will get old quickly.
Or, push the roof up and run the lags into a 2x4 placed along the edge of the roof cutaway. It would be less weight and create a lip to keep things from sliding off the loft.
A verticle 2x4 by the passenger seat will get old quickly.
