Slide issue
Had slide checked for squareness, etc. then installed guardian plates on the underside. Took it this AM to have tires checked and the slide had moved out about 1/2in or less. it is the Rear slide...R...
Forum Discussion
RBW used 2 motor types. One type has a built in brake and has a manual brake release lever. IF that lever was jolted to unlock your slide will do what you are experiencing. One quick way to determine if you have a brake lock unlocked----- retract the room fully and release the button. If the brake is unlocked, the room will relax and move out an inch or so at the bottom. Doug
