Slide out seals
The flexible rubber slide-out seals on my NTU 2008 Coyote 23cr are shot. Is there any way to replace them without removing the entire slide-out? And where would I purchase them?
Forum Discussion
- This is a 5er. I don't know what yours is.
My reseal job
I used parkin-acc.com for the wiper seals shown in that job.
For another slide, I used a bulb seal from uni-grip.com. I ran it adjacent to the OEM wiper bulb because at 12 years of age the bulb part was not sealing well enough when closed to keep the road dirt out. - Moved to Tech Issues forum from DIY.
- Try these. One of the will have the configuration you need.
www.pellandent.com
www.uni-grip.com
rvsurplus.net - Google is your friend. I don't recall the site, but they had photos of all the profiles. On mine there are screws about every six inches holding it. I took one off to do some work, and it was actually quite easy.
