โAug-30-2020 03:06 PM
โJan-19-2021 11:47 AM
mchero wrote:docj wrote:Birdie4961 wrote:
I have contacted Westland Sales. Its not the module board (thankfully). Instead it is the fan motor. Easy fix! I honestly love when the clothes come out a little damp, when the dryer was working!! A little shake and fluff, the clothes indeed were dry!
We've had an unvented Splendide for ~10 years and last year replaced our old one when the bearings went bad. The new one dries better than the old one did.
If the clothes aren't quite dry enough when the dry cycle ends, just start them again for another half hour or so. They will be totally dry by then. We can easily wash and dry a whole load of towels or a queen-size sheet set.
IMHO many of the folks who complain about the unvented Splendide don't pay attention to the instructions which state that the unit can wash ~15 lbs of clothes but can only dry ~11 lbs effectively. If you overload it, things will take forever to dry. We usually take a few things out to "line dry" which reduces the load so the dryer works well.
Many of the folks that complain are actual Splendide employees! Their is a reason for this! One being that the non vented units require allot of water.
I'd say their is a BIG problem with the non-vented combo's when Splendide employees, some who are up high on the ladder discourage people from using them!
โJan-19-2021 08:33 AM
docj wrote:Birdie4961 wrote:
I have contacted Westland Sales. Its not the module board (thankfully). Instead it is the fan motor. Easy fix! I honestly love when the clothes come out a little damp, when the dryer was working!! A little shake and fluff, the clothes indeed were dry!
We've had an unvented Splendide for ~10 years and last year replaced our old one when the bearings went bad. The new one dries better than the old one did.
If the clothes aren't quite dry enough when the dry cycle ends, just start them again for another half hour or so. They will be totally dry by then. We can easily wash and dry a whole load of towels or a queen-size sheet set.
IMHO many of the folks who complain about the unvented Splendide don't pay attention to the instructions which state that the unit can wash ~15 lbs of clothes but can only dry ~11 lbs effectively. If you overload it, things will take forever to dry. We usually take a few things out to "line dry" which reduces the load so the dryer works well.
โSep-09-2020 07:54 AM
Birdie4961 wrote:
I have contacted Westland Sales. Its not the module board (thankfully). Instead it is the fan motor. Easy fix! I honestly love when the clothes come out a little damp, when the dryer was working!! A little shake and fluff, the clothes indeed were dry!
โSep-01-2020 09:21 AM
โAug-31-2020 07:50 PM
โAug-31-2020 07:06 AM
bdpreece wrote:
Call Westland Sales (503) 722-9202 they are the factory sales and service for Splendide. Great people and they will assist you in troubleshooting your unit. They also will sell you the parts you need, Not a fan of the non vented model but if you elect to repair it these are the people to talk to.
โAug-30-2020 08:51 PM
โAug-30-2020 03:35 PM