Splendide Washer/Dryer
We have the Splendide 2000 and lately it has been taking forever to dry small loads. I checked the manual and cleaned the pump pre-chamber, but it didn't seem to help. Any ideas?
Forum Discussion
There is a filter in the top back corner of the unit that traps lint and if it gets clogged you will not have enough air flow for the dry cycle. I removed this filter as I don't care if lint gets blown outside. I have a straight exhaust with an outside cover that just sends the air downward. Even so, this can get clogged on rare occasions. I am able to unscrew this cover and remove the lint and assemble again. Takes about 2 minutes.
