Timken bearings...when would you repack?
Installing the Titan Disc brakes on my trailer, using Timken bearings and Mobil 1 synthetic grease....here is my question for y'all Since I don't have to pull the hubs to check brakes, I used Timke...
Forum Discussion
ernie1 wrote:I always see a minimum dropping point as a main specification.
Slightly off subject but was wondering if Mobil 1 Synthetic or any synthetic grease is the best stuff to use for these bearings? Been using Moly SO2 and have wondered about this stuff.
Mobil 1 seems to exceed all of them.
