MakerMK wrote:
Another thought is to use a simple power supply to drive the Schneider charge controller and don't even use the camper's built in charger. I'm sure that your suggestion to get another charger would work, but wouldn't it be more cost effective to make use of what I already have?
I think that is what I would do !
You do not need a 30V power supply. If you are NOT going to equalize
(i.e. leave the charge controller on manual equalize mode) than a power supply capable of providing at least 1V MORE than the Bulk Charging Voltage should be sufficient.
In other posts
Megawatt Power Supplies have gotten good reviews. While their supplies only claim a maximum output of 15.5V if you called and asked I'll bet they can set you up with one that would do 16V.