Voltage variations and Surge cut off.
We are hooked up to 50A service. I just recorded the voltages at different areas and I will note them below. I have a Progressive EMS/Surge suppressor hard wired in just before the breaker box. It has...
Forum Discussion
I decided not to try to trip the voltage by adjusting the pot. What I did was kept the post voltage on and shut off all power to the RV by way of the main RV 560A breaker. I then used my VOM to check the voltage incoming and outgoing to the EMS to be sure they were the same. Being said, I then adjusted the pots to the incoming voltage of both poles L-1 and L-2 to the same as the VOM dictated.
I then opened up the main breaker to be sure all areas of measurement were the same. I will wait to see what happens now. If Progressive calls me back I will ask questions. I also recorded the voltages before I made any changes in case I have to put anything back.
I then opened up the main breaker to be sure all areas of measurement were the same. I will wait to see what happens now. If Progressive calls me back I will ask questions. I also recorded the voltages before I made any changes in case I have to put anything back.
