Water pump issue

Question

Took my Class A in for warranty work on the original water pump that had quit working. They replaced the one old with a new pump. Just took it out and when I turned the pump on I noticed water pouring out of my water fill/dump bay.

Open the door and found that when the pump was on, water was being forced out of the City Water fill connection. All of my levers are in the correct position for using the pump. Not sure what they did at the repair facility but I'm not too crazy about bringing it back to them as I have had issues in the past. Won't be able to pull the panel off until the weekend. Is it possible they switched the input/output lines on the pump?

There is flow inside the Coach, but not what I'm used to. :h

old_guy · Answer

take it back, if you work on it they will void any warranty. make them do it right.

dbbls · Answer

The check value in the city water connection is stuck open. Stick your finger in and wiggle the white piece.

old-biscuit · Answer

dbbls wrote:The check value in the city water connection is stuck open. Stick your finger in and wiggle the white piece.Or the O-ring on plunger of check valve has been dislodged.2008 model rig.....replace check valve in the city water connection.Until then....screw a 3/4" PVC plug in city water connection

strudeau · Answer

Old-Biscuit wrote:dbbls wrote:The check value in the city water connection is stuck open. Stick your finger in and wiggle the white piece.Or the O-ring on plunger of check valve has been dislodged.2008 model rig.....replace check valve in the city water connection.Until then....screw a 3/4" PVC plug in city water connectionJust checked, it was a dislodged O-Ring. Thanks for the advise!

Forum Discussion

Water pump issue

About Technical Issues

Related Content

Water Pump issue

Kitchen Water Pump issue!

Plumbing/water pump issue

water pump and pressure issues

No pumping water