jshupe wrote:
cptqueeg wrote:
jshupe wrote:
Ended up reordering these today since the parts are in, except swapped the fronts out for Cooper RM253 due to stock issues there. Also ordered an Ironman I604 on steel spare.
Need the capacity now, because I'm placing a custom flatbed order.
Custom flatbed truck camper? If so what did you get?
Sorry, no, a custom flatbed to put my existing camper on.
97x102" flat bed
- tapered rear corners
- LED lights all around incl headache rack
- no ears on headache rack
- no stake pockets
- no rub rails
- 5/8" D rings welded to side at 1' intervals
- extra 7 way plug on rear driver's side
- two 48x18x18 toolboxes on top of the deck
- two 18x18x18 toolboxes on top of the deck
- two 30x18x18 toolboxes (in front of tires)
- two 18x18x18 toolboxes (behind tires)
- inset nuts for guide rails
- inset nuts for topside toolbox mounts
- guide rails for truck camper
- bolt-on brackets added to topside toolboxes
- recessed gooseneck hitch
- retain spare mount
- retain factory 2.5" receiver hitch
- factory backup sensor relocation
- factory backup camera relocation
I blueprinted the camper and am having the D-ring and toolbox placement, etc, where I want it. Looking forward to seeing how it comes out in a couple weeks.
Very specific requirements. Thanks for the pic.
Sounds like a great build.