Forum Discussion
kaydeejay
May 26, 2014Explorer
jodeb720 wrote:Try the same test on the slot where the right trailer brake light fuse is located. (It is just below the left one).
I did check the fuse, put an ohm meter and the fuse is good. It's still not working. When I remove the fuse, and put the volt meter in the spot where the fuse belongs, I get no voltage to the fuse when the brake is applied, but when the left turn or hazard is enabled, it gets voltage.
About Travel Trailer Group
44,029 PostsLatest Activity: Jan 18, 2025