2008 r vision wall sinking

[bondaygee]

hey there my friends so I just discovered my RV wall on one side has fallen by about 3 inches. I can see one little metal brace is broken on one side. is there a way to repair this kind of thing? somebody was helping me last summer and jacked up the side of the wall and shoved in some wooden plywood, but that didn't stop the wall from going back down.

sorry for the delay but here's what it looks like

https://drive.google.com/drive/folders/1CXHa137URqt3tePCIDVUc8whaycYDtcX

[PButler96]

For that to happen in a 2008 R Vision you have to have a failing floor assembly and / or broken outriggers. The outriggers support the floor and more importantly edge. The floor is a laminated assembly of two layers of thin plywood with foam and a square aluminum tube frame between them, glued and pressed together into a sandwich. It has a continuous piece of this aluminum tube at the edge along the sides of the floor assembly, on top the ends of the outriggers. The wall sits on top of this and is bolted down through the floor assembly through the outrigger. The wall is the same type of laminated construction.

[Lwiddis]

Pictures would help us understand the problem.