5 inches of foam board in bed?

Nice looking setup.

I had to build a frame as well. I used 2X4's on the front and sides with three 1X4 cross members, then screwed the whole thing to the bottom of my camper.

What year is that Coachmen, and what does it weigh? Sharp looking set-up.

Hi sorry you are correct. Forgot the CG is south of the border. Bill

I sure like seeing things come together. Using the ideas contributed to formulate your solution is always good and can be fun! Make sure you get the pick up bed rubber mat...it is well worth it! I have had mats in all the trucks since early 90's. Have fun with that TC!

I think you have it correct, "your going with the 2 x 6 platform, trimmed down an inch with a rubber mat. Also wedging 2 inches of foam board between the platform and inside of bed is a good idea."

Not sure about screwing the camper to the platform.

Paul

Hi Now that looks nice....Mid Atlantic TC ralley April 15- 19 At Tallpines Harbour camp ground in MD.

Agreed. Nice looking rig. However, Tall Pines Harbor CG is in Virginia.
CLICKY
Rally blog web site HERE.

Hi Now that looks nice. I'm sure the red truck is saying that's a load off my back. We are going to the Mid Atlantic TC ralley April 15- 19 At Tallpines Harbour camp ground in MD. If you have the time check it out. Bill

Just a follow up. I feel pretty good about going with the 2 x 6 platform. I may trim it down an inch. I set a rubber mat in the bed and screwed the camper to the platform. I also wedged 2" foam board between the platform and inside of bed. Only suspension mod is Stable Loads. It has a little sway to it when the wind blows, but feels good.



Thanks everyone for your help and advise.
Vic

hedge wrote:
I think I would have tried to build in some slide out drawers or something. Seems to me you could use all that space for storage.

See the 3rd mod, being that you do not have an overhang, in bed storage would work for you.
http://www.truckcampermagazine.com/camper-tech/2012-top-mod-contest-part-4

Hi The idea needed is to keep the camper wedged in from the bed front to the wheel wells. This will help keep the camper from sliding around. When raising the camper on a platform you will need to secure the frame so it won't slide in the bed. 2x6 wood will slide on metal. I would make the frame to a snug the shape of the bed with thin foam to protect the bed walls. A couple more cross 2x6's for support. They need to placed to best support the camper floor. Rubber padding is needed between the wood 2x6 or better still on top of the 4x8 sheet of whatever decking you use. Since your camper is narrow, I would add some wood guides to keep the camper square on top of the raised platform in your bed. Bill

That is a nice basement for storage.Maybe a extra water tank.