Atwood Furnace issues
Hello
Any help appreciated
Atwood furnace afsd20121 Winnebego micro 22'
At first would work a couple of cycles then no ignition. Reset and that is an issue as furnace has no outside access and well, lot of work to pull out
1. cleaned sail switch of dust bunny
2.furnace fired up
3. then fan only
As of last night new dinosaur board but bought from Amazon. Fan only no ignition
board locked out and fan would not restart although I reset
Today still no fan. Long story short.....
1. jumped out tstat and limit switch(which had continuity but to make sure) Installed new sail switch.
2. power at reset and connection on board for power. Nothing coming from fan conn on board.
all connections look good, seems to be in board. I reinstalled old board, same result.
I'm thinking I got a bad board from Amazon.
Thoughts?
3
Any help appreciated
Atwood furnace afsd20121 Winnebego micro 22'
At first would work a couple of cycles then no ignition. Reset and that is an issue as furnace has no outside access and well, lot of work to pull out
1. cleaned sail switch of dust bunny
2.furnace fired up
3. then fan only
As of last night new dinosaur board but bought from Amazon. Fan only no ignition
board locked out and fan would not restart although I reset
Today still no fan. Long story short.....
1. jumped out tstat and limit switch(which had continuity but to make sure) Installed new sail switch.
2. power at reset and connection on board for power. Nothing coming from fan conn on board.
all connections look good, seems to be in board. I reinstalled old board, same result.
I'm thinking I got a bad board from Amazon.
Thoughts?
3
